Spa & Hot Tub Installation

Choosing a location and a base

A filled spa can weigh several thousand pounds, so the base must be level and strong. A reinforced concrete pad is the most common, and decks require structural review. Consider access for delivery, distance from the house, privacy, wind, shade and views. Local codes restrict the placement near property lines, power lines and pools. The contractor visits to measure the site and recommend a layout that is comfortable to use in all seasons. Measure gates, doorways and overhead obstacles on the delivery path and share them with the contractor so the right equipment arrives the first time.

Electrical and safety requirements

Spas need a dedicated 240-volt circuit with a GFCI breaker and a disconnect within sight but at a safe distance. The wire size depends on the model and the distance from the panel. A licensed electrician or pool contractor with the right license performs the work and obtains the permit. Lockable covers, steps and handrails add safety, and keeping the area clear of cords and appliances reduces risk. Ask the electrician to label the disconnect and breaker, and show you where the emergency shutoff is before you use the spa for the first time.

Delivery, startup and ownership basics

On delivery day, the crew places the spa, levels it and connects the electrical, then fills it and checks for leaks. Startup includes balancing water chemistry, running the filtration and heating, and programming controls. You will get instructions for sanitizer, filter cleaning and winter use. Ask about covers, energy settings, maintenance reminders and what the manufacturer warranty requires, such as registration and use of approved chemicals. Keep a simple log of water tests and filter cleaning dates, which helps with warranty questions and keeps the water comfortable and clean.

Pool Cleaning & Maintenance

Skimming, brushing, vacuuming, filter checks, and chemical balancing on a weekly or biweekly sch…

Pool & Spa Equipment Repair

Pumps and motors, filters, heaters, salt cells, controllers, lights, valves, and leaking fitting…

Pool Opening, Closing & Cover Installation

Open the pool for the season, close it for the off-season, or install a new pool cover for the f…

Green Pool Recovery (Algae Clean-Up)

A green, cloudy, or neglected pool brought back to clear: heavy brushing, vacuuming, shock, filt…

Pool Leak Detection

Find out where a pool or spa is losing water: bucket and dye tests, plumbing pressure tests, and…

Pool Tile & Calcium Cleaning

Calcium and scale removed from the waterline tile and coping with pumice, bead-blast, or hand po…

Pool Drain, Acid Wash & Refill

Drain, scrub, and refill to reset a pool with stained plaster or unbalanceable water. Acid wash…

Pool Resurfacing & Replastering

Replastering and resurfacing of swimming pools by a licensed pool contractor: plaster, quartz, p…

Pool Removal & Fill-In

Licensed demolition and fill-in of an unwanted swimming pool, with permits, drainage, compacted…